:	Apr 28, 2004

.

Disconnect the battery ground cable.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Drain the engine oil.

.

Remove the oil cooler assembly.

.

Remove the engine front cover.

.

Remove the front differential.

.

Remove the steering gear.

.

Remove the generator.

.

Remove the generator mounting bracket.   Remove the 4 bolts.

.

Disconnect the heated oxygen sensor (HO2S) electrical connectors.   Release the 8 wiring harness securing clips.

.

Release the HO2S mounting bracket.   Remove the 2 bolts.

.

Release the HO2S wiring harness from the oil pan.   Release the 3 clips.

.

Remove the transmission retaining bolts.   Remove the 3 bolts.

.

Remove the sump pan.   Remove the 16 bolts.

.

Install the sump pan.   Clean the component mating faces.   Apply a bead of sealant, 3 mm diameter by 130 cm long, to the areas indicated.   Tighten the bolts to 20 Nm (15 lb.ft).

.

Install the transmission retaining bolts.   Tighten the bolts to 45 Nm (33 lb.ft).

.

Install the HO2S mounting bracket.   Tighten the 2 bolts to 10 Nm (7 lb.ft).

.

Connect the HO2S electrical connectors.   Install the wiring harness clips.

.

Install the HO2S wring harness.   Secure the clips.

.

Install the generator mounting bracket.   Clean the component mating faces.

.

Install the generator.

.

Install the steering gear.

.

Install the front differential.

.

Install the oil cooler assembly.

.

Install the engine front cover.

.

Fill the engine with oil.

.

Connect the battery ground cable.